News dynamics

News

Dongguan Jiaifa Plastic Raw Material Co., Ltd. (abbreviated as: Jiaifa), specializing in plastic raw materials, is a plastic enterprise integrating plastic raw material trade, production, research and development, color matching, and storage, and is equipped with a professional management system and R & D team., Production equipment, testing equipment, escort the needs of customers.

ABS plastic development prospects-Dongguan Jialfa plastic raw materials

ABS plastic development prospects-Dongguan Jialfa plastic raw materials

2021-10-11

ABS is a general thermoplastic engineering plastic developed in the 1940 s. It is a plastic variety with excellent comprehensive mechanical properties. It not only has good rigidity, hardness and processing fluidity, but also has the characteristics of high toughness. It can be injection molded, extruded or thermoformed. Most of the automotive parts are processed by injection molding method, ABS resin has the advantages of impact resistance, sound insulation, scratch resistance, better heat resistance, more beautiful than PP, especially in the transverse impact resistance and the use of temperature more stringent parts. ABS resin is the third largest resin used in automobiles after polyurethane and polypropylene. ABS resin can be used in the interior and exterior of the car, small parts such as the steering wheel, oil guide pipe, handles and buttons, and the exterior of the car includes the front radiator grille and lamp shade. ABS resin is easy to process, processing dimensional stability and surface gloss is good, easy to paint, coloring, can also be sprayed metal, electroplating, welding and bonding and other secondary processing performance, can be widely used in the field of electronic and electrical appliances, including a variety of office and consumer electronics/appliances, office appliances including electronic data processing machine, office equipment. Nowadays, in the electronic and electrical market, ABS resin will maintain its position in the electronic/electrical market that requires flame retardant and high heat resistance. ABS resin with flame retardant and high heat resistance has obvious advantages in the competition with ABS/PC and other engineering plastic alloys. ABS resin has a wide range of applications in the field of consumer goods, such as building materials pipes, plates or sheets, and is now being replaced by cheaper PVC resin. ABS resins are used in construction-related fields, where extruded sheets are used for sanitary appliances such as bath boxes, swimming pool linings, etc., in addition to injection molded pipes and fittings, and in small quantities to produce extruded telephone cable lines.

Learn more>

How is ABS plastic formed?

How is ABS plastic formed?

2021-10-11

ABS plastic is acrylonitrile (A), butadiene (B), styrene (S) three monomer terpolymer, the relative content of the three monomers can be arbitrarily changed, made of various resins. ABS plastic has the common properties of three components, A makes it resistant to chemical corrosion, heat resistance, and has a certain surface hardness, B makes it have high elasticity and toughness, S makes it have the processing and molding characteristics of thermoplastic plastics and improve electrical properties. Therefore, ABS plastic is a kind of "tough, hard and rigid" material with easy access to raw materials, good comprehensive performance, low price and wide range of uses. ABS plastics have been widely used in machinery, electrical, textile, automobile, aircraft, ship and other manufacturing industries and chemical industries. Dongguan Jiafa Plastic Material Co., Ltd. is fully committed to creating one-stop service for customers in need of enterprises: raw materials: all products of Taiwan ABS/SAN/GPPS/HIPS will be packaged in PP bags from May to June 2021. Alternate between old and new packaging during the period

Learn more>

JiaFa®Antibacterial grade PC resin

JiaFa®Antibacterial grade PC resin

2021-10-09

JiaFa®Antimicrobial grade PC resin is a polycarbonate (PC) resin that is polymerized using the dihydroxy compound of bisphenol A (BPA) and the carbonate compound of diphenyl carbonate (DPC). This resin provides glass-like transparency, high resistance to JiaFa®Antibacterial grade PC resin thermal, ultra-high impact resistance, dimensional stability, antibacterial rate of up to 99.9%. Suitable for use in various applications. This material is also compatible with other materials such as ABS and PET, which can create a variety of alloy products. It does not contain chlorine, so it is not corrosive and is conducive to mold maintenance. Besides JiaFa®Antimicrobial grade PC resins are also suitable for sterilization with ethylene oxide and gamma rays, so they can be used in medical equipment. This material is also suitable for all antibacterial grade 3C products, precision machinery, instrument products, auto parts, sporting goods, sanitary products and food and water contact materials.

Learn more>

Tell us in detail which TPU features you don't know.

Tell us in detail which TPU features you don't know.

2021-10-08

Jia is a collection of plastic raw materials trade, production, research and development, color, storage in one of the plastic enterprises. Can provide customers with plastic raw materials related integration solutions. The TPU name is thermoplastic polyurethane elastomer rubber. It is mainly divided into polyester type and polyether type. It has a wide range of hardness (60HA-85HD), wear resistance, oil resistance, transparency and good elasticity. It is widely used in daily necessities, sporting goods, toys, decorative materials and other fields. Halogen-free flame retardant TPU can also replace soft ones to meet environmental protection requirements in more and more fields. Wide range of hardness: By changing the ratio of the reaction components of the thermoplastic polyurethane elastomer rubber, products with different hardness can be obtained, and with the increase of hardness, the products still maintain good elasticity and wear resistance. High mechanical strength: the bearing capacity, impact resistance and shock absorption performance of the products are outstanding. Cold resistance: TPU glass transition temperature is relatively low, at minus 35 degrees still maintain good elasticity, flexibility and other physical properties. Good processing performance: it can be processed by common processing methods of thermoplastic materials, such as injection molding, extrusion, calendering, etc. At the same time, co-processing with certain polymer materials can obtain polymer alloys with complementary properties. Oil resistance, water resistance, mold resistance, good regeneration and utilization. TPU as an elastomer is a material between rubber and plastic, which can be seen from its rigidity, which can be measured by the elastic modulus. The elastic modulus of rubber is usually 1 ~ 10Mpa, thermoplastic polyurethane elastomer rubber is 10 ~ 1000Mpa, and plastic (ABS,PC,POM) is 1000 ~ 10000Mpa. TPU has a wide hardness range, ranging from Shore A 60 to Shore D 80 and has high elasticity in the whole hardness range. TPU is flexible in a wide temperature range of -40~120 ℃ without plasticizer. Thermoplastic polyurethane elastomer rubber has good resistance to oils (mineral oil, animal and vegetable grease and lubricating oil) and many solvents. It also has good weather resistance, excellent high-energy ray resistance. The well-known wear resistance, tear resistance, and yield strength are excellent; high tensile strength, high elongation, and low long-term compression set are all its significant advantages.

Learn more>

Dongguan Jialfa Plastic Materials Co., Ltd. official website officially launched

Dongguan Jialfa Plastic Materials Co., Ltd. official website officially launched

2021-10-03

Dongguan Jiaifa Plastic Raw Material Co., Ltd. (abbreviated as: Jiaifa), specializing in plastic raw materials, is a plastic enterprise integrating plastic raw material trade, production, research and development, color matching, and storage, and is equipped with a professional management system and R & D team., Production equipment, testing equipment, escort the needs of customers. Can provide customers with plastic raw materials related integration solutions. It has made achievements in the fields of plastic-related antibacterial, infrared penetration, thermal conductivity, electrical conductivity, antistatic, laser engraving, light guide, shading, UV resistance, glass fiber reinforcement, mineral reinforcement, toughening and other functional plastic materials. All products have passed Rohs,REACH,CP65 and other environmental protection certification.

Learn more>

There are several kinds of plastic raw materials classification?

There are several kinds of plastic raw materials classification?

2021-10-03

Dongguan Jialfa Plastic Raw Material Co., Ltd. (hereinafter referred to as: Jialfa), specializing in plastic raw materials, is a plastic enterprise integrating plastic raw material trade, production, research and development, color matching and storage, and is equipped with a professional management system, research and development team, production equipment and testing equipment to escort the needs of customers. According to the scope of application, there are mainly common plastics such as PE/PP/PVC/PS, etc. and engineering plastics such as ABS/POM/PC/PA. In addition, there are some special engineering plastic raw materials such as high temperature and high humidity resistance and corrosion resistance and other plastics modified for special purposes. Material utilization and color treatment 1. Most of the plastic raw materials can be recycled, but because the plastic (water mouth material) is more brittle than the general raw materials, it can only be used together with new materials (raw materials), and the maximum proportion should not exceed 25% as appropriate. The principle should be based on customer requirements and standards. Various types of plastic materials are different due to the required melting point. 2. As engineering plastic raw material products need to be matched with colors, plastic raw materials can be divided into: granular materials, color powder materials, color seed materials, and recently added liquid coloring in plastic raw materials. The raw material is that the pigment has been mixed into the raw material, and each plastic material has been colored, so the color of the product is stable and uniform. Toner and color material is the use of color or toner mixed raw materials, low cost, and do not need to store a large number of colored raw materials. But the color is not stable, it is difficult to control uniformity in production.

Learn more>

< 1...6789 > proceed page
All
  • All
  • Product Management
  • News
  • Introduction
  • Enterprise outlets
  • FAQ
  • Enterprise Video
  • Enterprise Atlas